Chapter 3 GROUNDING

Grounding is a system that serves to negate the potential difference so if there is a leak voltage or current will directly dumped into the Earth. The function grounding: Protection from high-voltage electrical installations in the system Grounding a to reduce or avoid harm caused by high-voltage lightning hazards eg. with high voltage

Grounding system serves as a means of drain current of lightning that spread in all directions into the ground. Things to note in the design of grounding system is not the onset voltage hazards step and touch voltage. The other criteria in making a grounding system is rather low price ground resistance but can escape the dangers ahead. In addition, the soil conditions are good for grounding is a wet ground, or swimming, or soil containing granite. Grounding to transmit electrical currents swept up in the electronic equipment that you protect can be made by means of soil on the banks of the Office membor you until the discovery of water depth. Insert plumbing into the hole. In work on drilling the ground to enlist the help of artisan makers of the well bore that has a drill ground. Attach copper wires in the ground, with a specific end copper rod is first plugged in all approximately 1-1.5 meters. Copper rod into hole input until the base of the hole. The rest of the copper wires that still appear at the end of the hole in the ground cable is connected to the ground immediately from your workspace. In order for the end of the cable the ground shake it's good the hole the ground covered with cement, so it just seemed the tip just above copper cable.